Connectors

TE Connectivity is moving to nickel-phosphorus coatings to reduce the CO2 footprint of its connector contact plating processes. Branding the plating stack Econidur, “according to TE internal analysis and calculations, in alignment with ISO standard 14067/14040/44, CO2 emissions decrease over 44% compared to palladium nickel plating, depending on layer thicknesses, performance level and connector type”, said the company. Is it ...

Mouser is now stocking TriMate rugged circular connectors from AirBorn, pitching them against larger legacy MIL-DTL-38999 connectors “while delivering equal or superior performance”, claimed the component distributor. These come in three mating-retention forms on the plug side: traditional 38999-style ratcheting tri-start threaded, push-pull latch, and break-away for quick de-mating. “Each plug type mates with the same receptacle to reduce manufacturing ...

Harwin has added right-angled options to its 8.5mm pitch 60A-per-contact Kona range of single-in-line power connectors. “The Kona Horizontal lineup includes nine right-angled 4, 3 and 2pin connectors for board mounting or board-and-panel mounting,” according to the company. “EMI shielding and housing rear-caps for each connector have also been created.” Single pin right-angle cable female and 90° male connectors are ...

Lighter connectors contribute to reduced overall system mass, which is particularly important in weight-sensitive applications such as aircraft, satellites and drones, explains John Brunt. Reducing the weight of connectors and cables in applications such as aerospace, electric vehicles (EVs) and space systems is crucial for enhancing performance, fuel efficiency and overall system reliability. Connectors are generally heavier than other components ...

Thomas Mittermeier makes the case for a rethink of connector design using expanded beam technology. Under the umbrella of C4ISR (command, control, communications, computers, intelligence, surveillance and reconnaissance) the development of sensors in the area of military aircraft is accelerating. The time between sensing and response, in particular, is critical. Whether radar or lidar applications, hyper- and multi-spectral imaging or ...

Aiming at aircraft, Powell Electronics is offering high power connectors and cables from Glenair. The 972 series is designed for up to 2kVac, 1,500Hz and between 150 and 800A. With stainless steel bodies and shells, “the connectors feature a +230°C maximum operating temperature”, according to component distributor Powell, which added that rope-lay cables optimised for the connectors are available at ...

Distributor TME is offering high power automotive connectors for electric vehicles from Amphenol GEC. There are two ranges: PowerLok G2 are for battery and traction connections at currents up to 300A, voltage up to 1kV, and conductors up to 150mm2.  Mated sealing is to IP67 PowerLok 4.0 G2 are physically smaller and for sensors and actuators at up to 60A, ...

In industries such as automotive, industrial automation, and heavy machinery, reliable electrical connections are crucial – especially in environments exposed to moisture, dust, and constant vibration. Harsh conditions can degrade traditional connectors, leading to system failures and costly downtime. This is particularly critical in applications like off-road vehicles, LED lighting, renewable energy installations, robotics, and construction equipment, where durability and ...

Exhibiting a low mated height of 4.35mm, the Si-Fly LP (low profile) cable-to-board assemblies have been released by Samtec for use in data centre, HPC and AI applications. Typically in these areas the z-axis height near the IC package is limited. In addition to side-to-side and front-to-back mounting, the assemblies allow belly-to-belly PCB mounting (connectors and cages on both sides ...

Binder is expanding its portfolio with the launch of 813 (T-coded) and 823 (L-coded) series field attachable M12 connectors. Industry 4.0 The circular industrial connector specialist highlights the parts are suitable for the demands of Industry 4.0 and harsh environments. In terms of high temperature resistance, the design is for an operating range of -40 °C to +105 °C. The ...