Electronics related to industrial applications
Diodes is aiming at contactless rotary motion and proximity detection with a 3D Hall-effect magnetic field sensor. Automotive applications are envisaged, include infotainment rotary and push selectors, gear shifts, door handles and powered seat adjusters, it said. AH4930Q, as it will be known, comes in a ~3 x 3 x 1.5mm SOT-26 package and includes three sensors to detect a ...
Allegro MicroSystems today announced three ICs: two analogue current sensors and a motor driver for fans. The first current sensor, ACS37630, is designed to be sat on top of a bus bar and partly surrounded by a U-core magnetic field concentrator. “Its vertical Hall technology enables sensing parallel to the package surface, ideal for system integration with U-core magnets,” according ...
Toshiba has announced a 1.2kWh 27.6Vdc li-ion battery module for electric buses, ships and boats. Called Type4-23 (also FM01202CCB04A), it is electrically similar to the company’s existing Type1-23 in that it is 2P12S (24 cells in two parallel 12 series arrangement) module, but the earlier versions resin baseplate has been replaced by aluminium to improve heat extraction. “When used with ...
STMicroelectronics has announced a series of AI-enabled and security-enabled industrial and IoT microcontrollers: STM32MP235. The parts have dual Arm Cortex-A35 cores (1.3 or 1.5GHz depending on version), a 400MHz Cortex-M33 and an 0.6Top/s neural network accelerator. On board is a 400MHz VeriSilicon GC8000UL 3D GPU capable of up to 66.5Mtriangle/s or 400Mpixel/s, Open GL ES 3.2.8 or Vulkan 1.2. This ...
Aiming at factory automation, Binder has announced D-coded M8 panel connectors with pre-installed single wires. “We supply the single wires untwisted, allowing customers to twist them according to their application needs to achieve better transmission results,” said Binder product manager Guido Werner. “M8-D-coded connectors enable communication between controllers, sensors and actuators in manufacturing and process plants.” There are three versions, ...
Leuze has introduced a broad range of stainless steel optical detectors for the food industry. “The devices are designed for reliable operation in wet areas and during intensive cleaning processes and have protection classes such as IP67, IP68 and IP69K, as well as Ecolab, CleanProof+ and Diversey certifications. There are retro-reflective sensors which send out light that is expected to ...
Cinon has created a range of 550W ac-dc single output power supplies measuring ~130 x 84 x 25.4mm. The power supplies do not have an internal fan, and 550W is only achievable with both baseplate and blown air cooling above 21.9cfm, with derating starting at 50°C ambient, and the maximum allowable load dropping to 350W at 80°C. With un-blown ambient ...
A worldwide distribution agreement means that Ohmite‘s power resistor range will be available through Arrow Electronics. Ohmite manufactures industrial and surface mount power resistors, load banks, heat sinks and rheostats in the US and Mexico. Its range includes high power, high voltage, current sense and surge resistors for use in transport, industrial, energy and aerospace sectors. In addition to standard ...
Bluetooth LE modules that combine Wi-Fi 6 (802.11ax) and Bluetooth Core 5.4 by Ezurio (formerly known as Laird Connectivity) are available from Mouser Electronics. The Sona NX611 Wi-Fi 6 + Bluetooth LE modules are based on NXP’s IW611 Wi-Fi 6 chipset and boast a data transmission throughput of 500Mbps. The small industrial IoT modules are suitable for use in IoT, ...
At Embedded World 2025 we caught up with Sumit Shah, Head of Product Management and Marketing at AMD, as part of our promotional coverage for the event He introduces the new AMD EPYC Embedded 9005 processor, a cutting-edge solution offering leadership core counts, expansive connectivity, and embedded features built for industrial, networking, and storage applications. Thank you to Sumit for ...
Electronics Weekly
