Home » Markets » Medical Electronics (page 10)

Medical Electronics

Content related to medical electronics

Imec joins with Neurogyn for pelvic nerve stimulator implant development

A5CC5B39-F1A0-43D5-BB38-FC7085692F09-300x200.jpeg

Imec is co-developing with Swiss medtech specialist NeuroGyn an implantable device for peripheral nerve stimulation. NeuroGyn specialises in neurostimulaton and surgical solutions for pelvic nerve disorders. Leveraging Imec’s expertise in ultra-low power wireless communication and powering, the new implant aims at prolonging the lifetime of the device while lowering its cost, making it suitable at the point of need. Clinical ...

Circuit checkers for medical devices

shutterstock_1442431958-300x200.jpg

For some medical applications, the reliability of components is vital. Shiraz Vakharia of Knowles highlights some of the application-specific decisions medical device designers need to make. In the medical industry, highly reliable electronic components are necessary for a variety of devices – ranging from systems that diagnose, such as magnetic resonance imaging (MRI) machines, to implantable devices that treat patients, such ...

13.3in TFT display for industrial and medical use

RDS Tianma 13.3-inch P-series TFT display

Review Display Systems (RDS) has introduced a 13.3in TFT display module for industrial use. Made by Tianma, the P1330FHF1MA00 is an HD display 1,920 x 1,080 pixels, 16:9 aspect ratio) with in-plane switching. “Tianma P-series display modules have been designed and developed to deliver exceptional optical performance and meet the requirements of the industrial and medical display markets and applications ...

Low-noise medical chip acquires ECG, respiration, blood oxygen and pulse

MAX86178 eval kit

Analog Devices is aiming at wearable patient monitoring devices with an analogue front-end for four vital signs: electrocardiogram, heart rate, blood-oxygen saturation and respiration rate. The chip, MAX86178, does this with three channels, one each for: photodiodes (optical PPG for blood oxygen and heart rate), voltages (electrocardiogram (‘ECG’ or ‘EKG’) and alternative heart rate) and bio-impedance (‘bio-z’ for respiration rate) Optical ...

Anglia Unicorn connects dots for tech start ups

Steve Rawlins CEO Anglia Components

Anglia Components has broken ranks with other distributors targeting the UK’s start-ups and entrepreneurs and has launched a dedicated division, Anglia Unicorn, to put academic start-ups in touch with financial seeders and both in touch with skilled engineers who can make the vision a reality. Named after the mythical creature which eludes capture, a Unicorn company is a start-up that ...

Non-magnetic RF inductors for medical imaging, and other tricky magnetic environments

Gowanda-non-magnetic-RF-inductors-28MG-300x200.jpg

Gowanda Electronics has introduced a series of non-magnetic RF inductors for medical imaging equipment – MRI and some x-ray machines – and other applications where magnetic materials must be avoided. Called 28MG, there are 60 devices spanning 1.2 to 18µH with resistances between 79mΩ and 4.15Ω, and carrying capacity of 315mA to 2.4A. They are all the same size, with bodies 23mm ...

Resting easy

sleep-tracking-300x200.jpg

Good quality sleep is linked to behavioural issues in young children. Laurence Weir looks at new sensor technology which tracks sleep patterns. The quality of a child’s sleep can have a huge impact on their lives. According to the American Academy of Pediatrics, a quarter of children under the age of five do not get adequate sleep. A continual lack ...

Wireless ‘neurograin’ network connects to brain neurons

Brown-University-Neurograin

Wireless ‘neurograins’, 48 of them, have been used to record rodent neural activity, at Brown University in Rhode Island. The sensing particles independently record electrical pulses made by neurons and send the signals to a central hub outside the skull for coordination and processing. “One of the big challenges in the field of brain-computer interfaces is engineering ways of probing as ...

Wash and wearable

Precision cleaning of wearable electronics boosts reliability, says Emily Peck of Microcare. The past year has seen a huge boost in the growth for wearable devices to diagnose and monitor patient health. The importance of remote patient monitoring (RPM) has become even more important in the wake of the Covid-19 pandemic. Lockdowns, travel restrictions and the requirement for social distancing ...

Low-cost device engineered for 1 hour Covid variant test

MIT-Harvard Covid test

Harvard and MIT researchers have teamed up to prototype a self-contained saliva-based diagnostic Covid test that can distinguish between variants in an hour and is “just as accurate as the PCR tests now used”, according to MIT. It is called ‘miSherlock’, for ‘minimally-instrumented Sherlock’, where Sherlock is a Crispr-based DNA/RNA test invented at Harvard’s Wyss Institute for Biologically Inspired Engineering. Two ...