At Embedded World today, Samtec announced mid-board optical transceivers for embedded and rugged applications, including phased array radar and medical imaging. ‘Mid-board’ describes optical links that replace PCB tracks for very high speed signals. The new transceivers, branded Halo-C, are aimed at PAM4 modulated 56Gbit/s (112Gbit/s in development) per lane links with 16 channels (eight bidirectional). Read all the latest news from Embedded ...
Transceiver
Optical pluggable transceiver stretches data rates and distances
Amphenol has released the QEPT 4-TRX 200G NRZ, a 200Gbit per second high-speed optical pluggable transceiver module. The QEPT (Quad Embedded Pluggable Transceiver), capable of 56Gbit per second at distances up to 70m over the full temperature range of 0 to +70°C. The aggregate performance is 200Gbit per second over four channels. The module is in response to faster data ...
Single-pair Ethernet tranceivers suite automotive links up to 40m
Microchip is aiming at automotive single-pair Ethernet links up to 40m long with a 7 x 7mm transceiver ICs called LAN8870B. Single-pair Ethernet is also being used in avionics, robotics and automation, it said. “For interoperability across industries, LAN887x PHYs are designed to be compliant with IEEE 802.3bp for the 1000BASE-T1 specification, and IEEE 802bw-2015 for the 100BASE-T1 specification*,” according ...
Rugged 100Gbit/s optical transceiver is solderless
Cinch Connectivity Solutions has announced a 100Gbit/s optical transceiver, intended for tough environments including aerospace, industrial and military. H28-100G-SR4 has four transmit and four receive channels, each rated at 25.78Gbit/s. For ease of installation and replacement, the package has a square array of flat pads underneath and it mounts to a similar array on the associated PCB via a guide ...
1.8V 2.5Gbit/s MIPI D-PHY 1.2 repeater boosts data and clock
Diodes has released a 2.5Gbit/s MIPI D-PHY 1.2 compliant signal repeater for high pixel-count cameras. PI2MEQX2503 regenerates and equalises two data lanes and a single clock. It “compensates for PCB, connector, cable and switching-related losses”, said the company, and “enables optimum electrical performance from a CSI2 source to a DSI sink”. Active, it consumes 120mW, then it has 5 and ...
Stripped-down 2.4GHz-only Wi-Fi 6 radio chip for lower cost designs
Nordic Semiconductor has taken 5GHz radios out of its recent nRF7002 Wi-Fi 6 companion IC, to create the 2.4GHz-only nRF7001. “nRF7001 lowers the cost of the bill-of-materials for designs requiring single band capability for smart home, smart city, industrial automation and other low power Wi-Fi IoT applications”, it said. It “offers all the Wi-Fi functionality of the nRF7002, including compliance ...
VLSI Symposium: 100GHz transceiver for 6G comms
Tokyo Institute of Technology has created a Sub-THz 6G transceiver, which will be revealed next week at the VLSI Symposium. Capable of transmission and reception at over 100GHz, and at 112Gbit/s, “by effectively suppressing the self-interference caused by the transmission signal leaking into the receiver, the proposed architecture reaches unprecedented data rates while maintaining a surprisingly compact size”, according to ...
VLSI Symposium: Imec’s low-power UWB transceiver ranges to 1.4mm
Belgian lab Imec is claiming record ranging precision and power consumption for a novel 6 – 9GHz IEEE 802.15.4z UWB (ultra-wide-band) impulse-radio transceiver: 1.4mm ranging, and 8.7mW Tx plus 21mW Rx consumption in continuous mode. “It paves the way for a variety of automotive applications,” according to Imec. “One use-case includes the creation of radar-on-chip systems for in-cabin child presence ...
Electronica: 78 – 81GHz multi-channel radar transceiver for automated driving
Following its acquisition of Steradian Semiconductors in August, Renesas entered the automotive radar market this week when it introduced a multi-channel 76 – 81GHz transceiver at Electronica. Designed for driver assistance and Level 3 (and higher) autonomous driving, the MMIC (monolithic microwave integrated circuit) is aimed imaging radar, long-range forward radar and ‘4D’ radar, “but can also be used for ...
High-power E-band transceiver for 5G xHaul
Filtronic has announced an E-band transceiver for carrier-grade 5G back-haul, mid-haul and front-haul, together known as xHaul. Called Morpheus X2 and designed to work at 71 – 76GHz and 81 – 86GHz, it offers +23dBm linear transmit power, 3dB higher than the company’s earlier Morpheus II product, from the same 90 x 80mm footprint. “This higher power level enables longer ...