Home » Tag Archives: PCIM

PCIM

PCIM (Power Conversion and Intelligent Motion) is a key industry event showcasing power electronics, motor control, and energy management technologies. Electronics Weekly covers PCIM conference insights, new product launches, and trends influencing power electronics design and applications globally.

PCIM: Automotive LLC controller

TI UCC25661x-Q1 LLC controller app

At PCIM in Nuremberg this week, Texas Instruments announced an automotive-qualified LLC controller for light electric vehicle charging, and demonstrated it in a three-stage ac-dc battery charger for electric two-wheelers. (LLC is an inductor-inductor-capacitor topology, see diagram) “But despite the benefits that the LLC topology can offer, including minimal standby power and low audible noise, electric vehicle manufacturers have been ...

PCIM: 40V 0.8mΩ GaN power transistor for synchronous rectification

EPC90143 GaN power transistor dcdc dev board

EPC aims to displace silicon mosfets from secondary-side synchronous rectifiers with its latest 40V GaN power transistor, designed specifically for 48V to 12V LLC dc-dc converters. “With the EPC2366, and upcoming lower voltage parts, we are expanding the GaN beach-head across low-voltage applications that have long been dominated by silicon,” said EPC CEO Alex Lidow. Packaged in 3.3 x 2.6mm ...

PCIM: 1,000V 125A MEMS relay proof-of-concept

MEMS relay platform Menlo Micro

Menlo Microsystems is demonstrating a way to scale its MEMS relays – micro electromechanical relays – to “power distribution and control systems to 10MW and beyond” today at PICM in Nuremberg. Based on the company’s MM9200 300V 10A single-pole single-throw switch, the demonstration is of technology behind a 1,000V and 10,000A circuit breaker being designed for the US Navy. According ...

PCIM: power semiconductor testing

Seica S20-IN3 semiconductor tester

Seica will be revealing two power semicondctor testers at PCIM in Nurember next month: one for ac and dc characteristics, and the other for thermal resistance. S20 IS3 (right) is intended to work with SiC and GaN  as well as more conventional technologies, and is for ac and dc, static and dynamic testing. “It performs accurate and repeatable characterisation of ...

PCIM Europe 2025 – Nuremberg

PCIM 2015

PCIM Europe PCIM Europe (Power Conversion and Intelligent Motion) is the international leading exhibition for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. It runs 6-8 May, 2025 in Nuremberg. International exhibitors inform visitors in three exhibition halls about the newest products, trends and developments in the power electronics industry. PCIM Europe is the forum for technologies for the ...

PCIM: WeEn adds 1,200V IGBTs

WeEn Semi TO247

Shanghai-based WeEn Semiconductors unveiled 650V and 1,200V IGBTs with fast recovery anti-parallel diodes at PCIM in Nuremberg. “Based on fine trench gate field-stop technology, the IGBTs provide a more uniform electric field within the chip, support higher breakdown voltages and offer improved dynamic control,” according to the company. “A positive temperature coefficient simplifies parallel operation.” Ratings are 650V 75A, 1.2kV ...

PCIM: 24 channel LED driver for vehicles

Novosense package

Novosense Microelectronics announced a 24 channel automotive LED driver at PCIM in Nuremberg today. NSL21924 is a high-side driver, aimed at rear lights, exterior lights and general automotive interior and body lighting. 16 channel NSL21916 is also available. Qualification is to AEC-Q100 Grade 1 (Tj = -40 to +150°C). The LED supply voltage can be across 3 to 16V, and ...

PCIM: 250W smart GaN motor driver is only 12x12mm

TI DRV7308 GaN smart motor power module

Texas Instruments introduced a 450V intelligent power module that includes a GaN three-phase bridge for motors up to 250W. Called DRV7308, it can stand-off 650V and handle pulses up to 5A. Inside its 12 x 12mm QFN package and six 205mΩ hemts (at 25°C ambient), drivers and protection component, and it is capable of implementing inverters with >99% efficiency, according ...

PCIM: 750V 4mΩ SiC jfet for circuit breakers in TOLL pacakge

Qorvo UJ4N075004L8S SiC jfet

Qorvo has picked depletion-mode (normally-on) silicon carbide JFET technology to build a 750V 4.3mΩ transistor for circuit breakers, and put it in a 10 x 12mm surface-mount TOLL package. “It was designed for circuit protection applications including solid-state circuit breakers, where low resistance, thermal performance and reliability are paramount,” according to the company. This “JFET can withstand high instantaneous junction ...

PCIM: 50V, 8.5mΩ GaN hemp in 1.5 x 1.2mm package

EPC90155 dev board

EPC is aiming at USB-C PD applications 50V 8.5mΩ GaN transistor with a 1.8mm2 footprint. EPC2057 measures 1.5 x 1.2mm and can handle 9.6A continuously (25°C) and 66A single 300µs pulses (25°C). With such a tiny package, thermals are important. According to the data sheet, junction-to-case thermal resistance is 2.3°C/W, then it is 7°C/W junction-to-board, 72.5°C/W junction to ambient on ...