Rutronik

Rutronik is aiming at 3-phase industrial control cabinets with a DIN-rail mount mains filter series from Schurter. “The housing, with a width of just 44mm, requires extremely little space on the mounting rail,” said distributor Rutronik. “The single-stage filter is available as a standard version or with high attenuation. FPAC RAIL impresses above all with its leakage current of just ...

Toshiba has created a pair of highspeed photo relays for pin-switching in semiconductor test equipment. “Improved infrared LEDs and optimised photodiode arrays in these models enable switch-on times to be reduced to 150µs while maintaining signal quality,” according to distributor Rutronik, which is stocking the parts. “In addition, the S-VSON4T package saves space on the circuit board.” – it measures ...

Rutronik has added a lower power Epson 32.768kHz crystal to its line up. Power saving from the FC1610BN comes from its low ESR (effective series resistance) which is typically 45kΩ at +25°C, a maximum of 60kΩ over -40 to +85°C and a maximum of 70kΩ up to +105°C. Its surface-mount package measures 1.6 x 1mm and is ceramic with a ...

Vishay has created a fast opto-coupler that can operate at 25Mbit/s. Called VOIH72A, is has a digital buffering on the input and output. “The component combines a maximum pulse distortion of only 6ns, a maximum supply current of 2mA and a supply voltage range of 2.7 to 5.5V, and is fast enough to support bus systems such as SPI, as ...

Embedded World 2025: LED design is highlighted by Rutronik with its RAB5 adapter board. It features ams Osram Osire LEDs which are designed for dynamic, ambient lighting. LEDs are customisable to meet specific applications, using the manufacturer’s graphic user interface (GUI). LEDs are individually addressable chips for colour and driver selection. The LEDs can be used for interior and ambient ...

Rutronik has added a 2.1 inch round TFT to its small display portfolio, a 480 x 480 TFT from DLC Displays called DLC0210RHCS-1. It is an IPS type for wide (±80°) viewing angle, and typically achieves 16.7m RGB colours and up to 300cd/m2 – driven by an LED backlight. Claimed typical straight-on contrast ratio is 1,000. Operation is from 5V ...

The distributor Rutronik expands its connector portfolio with the Mini-Fit family from Molex. Possible applications include automotive, industrial, telecommunications, networking or medical. Designed for an operating temperature of -40°C to +125°C, the Mini-Fit connectors are available in board-to-board, wire-to-board and wire-to-wire configurations. They deliver up to 13.0A with available options for dummy plugs and terminal position locking. And note that ...

Distributor Rutronik has added three surface-mount RTK-enhanced GNSS modules from Unicore to its portfolio. RTK – ‘real time kinematics’ – is a service that increases the accuracy of satellite navigation systems. UM982 GPS L1/L2/L5 BDS B1I/B2I/B3I GLONASS G1/G2 Galileo E1/E5a/E5b QZSS L1/L2/L5 SBAS 16 x 21 x 2.6mm UM980 BDS B1I/B2I/B3I/B1C/B2a/B2b GPS L1/L2/L5 GLONASS L1/L2 Galileo E1/E5a/E5b QZSS L1/L2/L5 SBAS ...

Rutronik has picked the ST12 from JAE for customers seeking a ‘push-push’ microSD card connector that is robust – up to 10,000 mating cycles – and whose solder joints can be inspected – as the case is cut away. “This series makes its inspection and repair simpler through the use of external surface-mount leads, which are visible and easily accessible,” ...

Component distributor Rutronik is offering a series of tiny surface-mount magnetically shielded power inductor from Knitter, The ICSIxxxxxxTxSHyST12 series spans sizes between 1.6 x 0.8 x 0.8mm and 6.6 x 6.4 x 3.1mm, inductance from 0.1 to 10μH and saturation currents from 1.3 to 35A. “The inductor series works reliably at operating temperatures from -40 to +125°C and is suitable ...